ST101C Automatic Clean Desktop DC Ion Blower
ST101C Automatic cleaning type
Is the successor of ST101C,
Electrode maintenance has automatic replacement function,
A cleaning brush is arranged inside for cleaning,
Automatic occasions basically do not need maintenance.
Product features:
1. Automatic discharge needle cleaning function (once every 24 hours) equipped with positive and negative ion
balance indicator to improve maintenance efficiency and static electricity removal efficiency
2. Equipped with positive and negative ion balance indicator to improve maintenance efficiency and static
electricity removal efficiency
3. Using HDC-AC mode, the discharge needle is anti-fouling and can play a stable antistatic performance for a
long time
4. Through micro-discharge detection and over-current detection, safety is ensured
5. Equipped with alarm function when the high pressure is abnormal and the blower stops
6. Automatic occasions basically do not need maintenance
Technical parameter
Input voltage | DC24V (with AC adapter, support AC100-240V) |
Capacity | 18VA |
Output voltage | ±7500V0-p |
Ionic equilibrium | Under ±5V (300mm away, when leaving the factory) |
Air quantity | 1. 4~3. 2m3 /min |
Wind speed
| 1.8 ~3.6m/s (the distance from the vent window to the center is 300mm) 0.4~0.6m/s (wide-angle vent window is 300mm away from the center) |
Ozone generation | Under 0.004ppm (distance 150mm) |
Work environment | Ambient temperature: 0~40℃, ambient humidity: 15.85% RH (no condensation) |
Filter | Prefilter stage |
Output signal | MOSFET relay has no voltage contact output (NC output), (alarm output and ion balance alarm output) |
Main body size | 180mm (L) ×110mm (W) ×200 (H)mm (including bracket) |
Weight | 1.5kg |
Noise | 59dB(A) distance 1m |
Sheathing material | Iron |
Appendix | Operating instructions, test reports, certificates and warranty cards |
Accessory part | The replacement filter AC006A, the AC adapter DC013B and the automatic motor brush assembly DC011B |
Electrostatic removal area
Product size
