High frequency DIRECT current ion wind snout built-in super small piezoelectric transformer high frequency direct current ion wind snout

High-frequency DC ion nozzle with built-in subminiature piezoelectric transformer.

This product is designed by professionals, with less brackets, convenient installation and direction adjustment.

Mainly used in electronic assembly line, painting industry, medical machinery manufacturing and packaging, semiconductor

 production and flat panel display manufacturing, packaging, injection molding production, photoelectric and other industries.

Product Features:

High reliability: Adopt air connector to improve ozone resistance.

Ensure safety: Adopt transformer box with new structure, and stop high voltage output when cleaning and replacing discharge needle

Nozzles with improved ozone resistance: All kinds of nozzles with high ozone resistance

Easy to maintain: The discharge needle is detachable and easy to maintain, and can be pulled out together with the transformer from

 the rear to clean and replace the discharge needle conveniently.

High-voltage stop alarm: It has alarm display function during high-voltage stop and is equipped with normally open and normally

closed double contacts without signal contact.

Clean check "C.C": It is also equipped with normally open non-signal contact

Technical Parameter

Note 1: The nozzle was measured with a 150mm, 20pF Charged plate monitor

Note 2: The static removal time is the attenuation time from ±1000V→±100V, and the static removal time is less than <1.5S s.

Note 3: The measured distance is 50mm from the flat panel monitor

Note 4: Test standards: ANSI/ESD.STM3.1, ANSI/ESD.SP3.3, SJ/T 11446 - 2013

Product Size

Optional accessories

High Frequency AC Ion Nozzle

AC small ionizer with built-in subminiature piezoelectric transformer

Action Principle

ST-6 high-frequency AC type ion nozzle applies the international advanced technology and adopts small piezoelectric transformer to

change the input direct current into high-frequency low-voltage alternating current.

The discharge needle made of special alloy material makes the discharge stability and wear resistance of the needle surpass the

commonly used metal discharge needle.

The discharge needle can be replaced, and ST-6 has built-in electrostatic removing electrode for corona discharge to generate ions.

Maintenance

1. Adjustment of electrostatic removal effect

①. Static removal effect Static removal time is inversely proportional to air pressure. The air pressure should be 0.3Mpa-0.7Mpa.

②. The distance and angle between the nozzle head and the electrostatic field all affect the electrostatic effect, so we should pay

attention to debugging until we are satisfied.

2. Daily Maintenance

①. Pay attention to anti-collision when using nozzle, and pay attention to anti-falling after use. Even if the nozzle is fixedly

installed, care should be taken to prevent objects from colliding.

②. Clean the ion needle and ion needle chamber of nozzle with absolute alcohol, but not with water from Tianna. When cleaning,

turn off the power first, then screw off the small plastic cover (also called air accelerator) in front of the nozzle head with a camera,

and clean the ion needle and the inner chamber of the ion needle with a cotton swab dipped in absolute alcohol to clean the internal

stains and dirt.

③. Timely cleaning and maintenance can not only improve the use effect, but also prolong the service life.