ST102D Table Type Double-Head AC Ion Fan

Product features:

1. Automatic ion balance system, ion balance: within 0±10v

2. Equipped with power-off operation indicator and high-voltage abnormal alarm indicator

3. Equipped with high-pressure abnormal alarm buzzer

4. Special tungsten alloy discharge needle, long-term use without wear and tear

5. The loading and unloading of the windshield is very simple, and the cleaning of the electrodes is very

Convenient

6. The shell sheet metal is galvanized on both sides and electrostatically sprayed

7. Piezoelectric high-voltage power supply is used, which is light in weight, small in size, free of electromagnetic

interference and safe in use. It is equipped with automatic ion balance system and high-voltage anomaly

monitoring system

8. Automatic cleaning function can be added (the internal cleaning brush is installed for cleaning, and

maintenance is basically not needed in automatic occasions)

Technical parameter

Input voltage	DC24V (with AC adapter, support AC100-240V)
Capacity	25VA (at maximum wind speed) ±
Output voltage	±7500VO-P
Ionic equilibrium	Below 5 V (distance 300mm: when leaving the factory)
Air quantity	1.4~3.2m³/min X2fan
Wind speed	1.7~3.3m/s (300mm from the center)
Ozone generation	Under 0.006ppm (distance 150mm)
Work environment	Ambient temperature: 0~40℃, Ambient humidity: 15~85%RH (no condensation)
Filter	Prefilter stage
Output signal	MOS FET relay has no voltage contact output (NC output), (OFF when high voltage is abnormal or fan is abnormal)
Main body size	380mm(L)×110mm(W)×235mm(H) (including bracket)
Noise	62dB(A) (distance 1m)
Sheathing material	Iron
Appendix	Operating instructions, test reports, certificates and warranty cards
Accessory part	The replacement filter AC006A, the replacement discharge needle assembly DC012B, the automatic motor brush assembly DCO011B, and the straight vent window DC010B

Electrostatic removal area