Ion air gun maintenance

Attention should be paid when using ion air gun:

First, the requirements of power supply and air source

1, the power supply must have ground, and to ensure full grounding, transformer must ensure good grounding, before each use to check whether the grounding wire knob is tightened. Ionic air gun is a high voltage energized product, so each energized working time should not exceed 16 hours. Otherwise: high pressure leads to high voltage line, air gun hair heat, ion needle and ground wire ignition, which leads to plastic parts gradually form honeycomb coke loss, ion exclusion is also gradually reduced, and even cause security risks.

2. All air sources must be effectively filtered. Sometimes a secondary filter is required. The screening program should be cleaned in time. Otherwise: water, oil and dust/dust particles will enter the ion generation chamber and adhere to the inner wall of the plastic parts. At a certain point, the ionic needle ignites it. Results The cellular coke loss of plastic parts was gradually formed, and the ion discharge was gradually reduced, which affected the effect of electric removal, especially caused security risks and even ignition.

Two, in addition to static effect adjustment

1, in addition to electrostatic effect in addition to electrostatic time and air pressure is inversely proportional. Pressure should be 0.2Mpa-0.5mpa.

2. The distance and Angle between the wind gun head and the electrostatic field all affect the electrostatic effect, and attention should be paid to debugging until satisfactory.

Three, daily maintenance

1. The head of the wind gun is easy to break. When using the wind gun, pay attention to anti-collision and anti-fall after use. Even if the air gun is fixed, care must be taken to prevent objects from colliding.

2, the air gun pressure regulating valve is moderate, appropriate amount of point into the universal rust-proof lubricant.

3. When cleaning the ion needle and ion needle chamber of the ion air gun, anhydrous alcohol should not be used to wipe the head and gun body with water, so as not to corrode the plastic parts and further affect the ion balance.

4. When cleaning, power off first, clean ion needle and ion needle chamber with anhydrous alcohol dipped in cotton swabs, clean the internal stains and dirt inside.

5, for the production of high precision enterprises: he must ensure that there is a good, durable electrostatic removal function. The best way to clean is to use a cotton swab dipped in alcohol to clean the residue on the ion needle.

6. Keeping the air gun clean can not only achieve better results, but also prolong the life of the air gun.

Four, to inform

1, high pressure ion air gun is a precision, sensitive electrostatic removal products. Under the conditions of its use, the use time can reach 10,000 ~ 15,000 hours.

2, all high voltage in addition to static equipment, in the use of work, to often check whether the product has reached the static function, there is no abnormal situation, such as the individual products are found to be different, to timely exit the working area, contact the supplier to solve.

3, the wind head and the high voltage line connection, do not often force bending rotation, because the wind head and the rod connection is metal and high voltage line is easy to break, easy to cause ignition discharge burned; Air gun is a high voltage electronic product, to achieve the principle of people off power.

4. All products are not under the condition of ungrounded power supply and unclean air source, and the failure, damage and other consequences caused by careless use are not within the scope of our warranty and responsibility.

5, our products from the date of sale within one year due to their own parts, materials and technology caused by quality problems, our company free maintenance or replacement