Daily maintenance of electrostatic eliminator

Q: How to maintain the electrostatic elimination rod daily

A: Ionic wind rod is widely used in many electronic industries. It is used in large-scale and super-large-scale integrated circuit clean workshop to avoid static electricity generated by human body moving in the workshop. Meanwhile the ionic wind rod is making

Sometimes it's necessary and there's some wear and tear. So we need to regularly maintain and maintain the ionic wind rod, so how do we maintain and maintain the ionic wind rod well?

In industrial production, due to the friction, stripping, extrusion and induction between objects, the surface area of objects has different properties of charge. When such charge accumulation reaches a certain level, industrial products are produced

Generating electrostatic adsorption and discharge phenomenon. Static charge accumulation and discharge will cause great influence and damage to industrial production. The role of the ionic wind rod is to use air ionization to produce a large number of positive and negative charges, and dry

Clean compressed air blows out the positive and negative charges. It creates a stream of positive and negative charges that neutralize the charge on the surface of the object. When the surface of an object is negatively charged, it attracts the positive charge in the stream

Charge, when the surface of the object with a positive charge, it will attract the negative charge in the current, so that the static electricity on the surface of the object is neutralized, to eliminate static electricity. If the ionic wind rod is attached to the electroneedle surface

Dust will block the discharge needle of ionic wind rod ionizing air into positive and negative charge, long time working load increases, thereby producing certain heat, so that the performance of its plastic parts declines, causing embrittlement phenomenon.

How to maintain:

1. In the process of using the ionic wind rod, when the tip of the needle accumulates dust or debris, it must be cleaned in time.

2, with electrostatic brush, dust-free cloth dipped in anhydrous industrial alcohol gently remove dust on the shell of the ionic wind rod, at least once a week.

Instructions for operation:

1. In the process of using the ionic wind rod, how to clear the dust or debris from the launching tip of the ionic wind rod

2. How to clean dust on the shell of ionic wind rod -- detailed operation as shown in the figure below

▲ It must be operated 10 minutes after the power is cut off.

▲ After cleaning, you must wait for alcohol to volatilize completely, and then power on the work, can not use any other organic solvents to clean the bar body.

Matters needing attention:

1. The power input power (220V AC) of the power box must be connected to a reliable ground terminal.

2. The ground cable of the ionic wind rod must be connected to the ground terminal of the power box to ensure user safety.

3. The device should not be used in rain or wet environment.

4. Do not use the device in inflammable and explosive environment.

5. It is strictly forbidden to disassemble products without authorization. Internal maintenance and repair must be carried out by professional personnel.

6. Turn off the power when checking or replacing the product; otherwise, electric shock or fire may occur.

7. Specially designed for removing static electricity, it is forbidden to use for other purposes, any abnormal use may cause machine failure, electric shock, fire and other hidden dangers.

8. It is forbidden to touch the electrode needle under the state of power-on, otherwise it may cause fault and electric shock accident.

9. Electroacupuncture is a sharp metal object, please use it with care.

10. Before powering on the product, please check the specifications of the power supply. Any power supply that does not meet the specifications may cause damage or even failure to the product.